How to use the multifunctional hopper cleaning machine correctly

The multifunctional hopper cleaning machine is developed by our company. The machine is reasonable in design, compact in structure, stable in operation and easy to operate. It is an ideal barrel cleaning equipment for pharmaceutical companies to optimize production processes.

The cleaning machine is mainly composed of a cleaning system, a pumping station system, an air treatment system, a control system and the like. When working, open the entrance door of the washing machine, push the used mixing hopper, turnover hopper and other containers into the cleaning station (the discharge butterfly valve should be in the open state), close the inlet door of the cleaning machine when it is in place, and prepare for cleaning. Set the cleaning procedure (hot water, washing liquid, process water, hot air), cleaning time and drying time according to the process requirements. After confirming, you can start cleaning and start working according to the set procedures and requirements. The outer surface of the container is pressurized and sprayed by the nozzles around the cleaning station, the inner surface is pressurized and sprayed by a retractable rotating nozzle, and the bottom nozzle is pressurized and sprayed to the lower port butterfly valve. After the cleaning is completed, the device automatically enters the set drying program until the entire program is completed, and the whole machine stops. Open the outlet of the washing machine, push out the cleaned container, and send it to the intermediate station for storage in the next production program.

The workflow of the device is very simple:

First, open the warehouse door, push into the turnover hopper, insert the wheel baffle, close the door, press the start button, the top cleaning nozzle automatically extends into the hopper, the rotating tray begins to rotate; the bottom drain air control ball valve opens, cleans The machine enters the working state.

The tap water control ball valve is opened, and the tap water is pressurized by the booster pump, and is sprayed by the side fan nozzle, the top automatic rotary nozzle, and the bottom spiral nozzle, and the 360-degree no-angle brush cleaning of the turnover hopper is performed.

The tap water control ball valve is closed, the hot water gas control ball valve is opened, the hot water is pressurized by the booster pump, and the side fan nozzle, the top automatic rotating nozzle, the bottom screw nozzle are sprayed out, and the cleaning agent gas control ball valve is opened, the cleaning agent and the cleaning agent The hot water is mixed, and the turnover hopper is cleaned 360 degrees without dead angle brush cleaning. Later, the cleaning agent air control ball valve is closed, and the hot water continues to be sprayed.

Then, the hot water pneumatic ball valve is automatically closed, the pure water gas control ball valve is opened, the pure water is pressurized by the booster pump, and is sprayed by the side fan nozzle, the top automatic rotating nozzle, the bottom spiral nozzle, and continues to 360 degrees without the turnover hopper. Dead corner brush cleaning.

After three kinds of water cleaning, the turnover hopper has been cleaned, the pure water gas control ball valve is closed, and the drain air control ball valve is closed later.

The hot air fan is started, the air duct air control butterfly valve is opened, and the top exhaust fan and the air control butterfly valve are also opened, so that the hot air in the warehouse is convected.

The air is passed through a fan, a medium efficiency filter, a heat exchanger, and a high efficiency filter to generate clean hot air into the chamber to dry the turnover hopper.

Later, after the turnover hopper is dried, the hot and cold damper controls the cylinder, the hot damper is closed, the cold damper is opened, and the air is cleaned by the fan, the medium efficiency filter, and the high efficiency filter to generate clean natural wind, and the hopper is cooled. .

After the entire process is completed, the washing machine is stopped, and another cleaning door is opened to take out the cleaned cleaning hopper.

How the device is used

With the widespread use of hopper mixers and hoppers and the increasing scale of pharmaceutical production, the cleaning of hoppers and tools will be a non-negligible link, and the use of hoppers has become large and diverse, artificial There is a gap between the cleaning hopper and the actual production and GMP requirements of modern pharmaceutical companies. To this end, our company designed and developed the ZLXHD series of cleaning machines.

Through the above small series for everyone to share, how do you use the multifunctional hopper cleaning machine for proper operation ? Have you learned it? I also hope that everyone can use this device more easily after reading this article.