In the basement to build a cold storage, first of all, the storage of the storage body does not have four sides of the air, and there is no direct sunlight in the summer and cold weather in the winter. However, the basement is surrounded by a cement wall carrier or a soil wall carrier. To build a cold storage, it is necessary to heat the surrounding of the carrier, otherwise the cold air will penetrate into the wall or underground (the term is called: running cold).
So what should be paid attention to in the construction of the basement cold storage?
1. Basement insulation: The insulation of the basement is recommended. We recommend the use of polyurethane double-sided color steel cold storage panels, polystyrene double-sided purchase cold storage panels or polyurethane wall coating. If the basement area is relatively large, it is recommended to use extruded plates, reinforced concrete mesh at the bottom, and then use the insulation measures of the poured concrete floor. The better the insulation is, the better the cooling effect, the better the insulation is, the better the maintenance of the equipment, the better the insulation, the better the energy saving effect.
2, refrigeration equipment installation: compared to the basement cold storage installation, refrigeration equipment installation is quite important.
(1) If the external unit of the refrigeration equipment is installed in the basement, it will definitely involve heat dissipation. Anyone who knows the principle knows that the refrigeration equipment must have a hot air fan that is discharged externally. The hot air can be discharged to cool the air. If the refrigeration equipment Installed in the basement, the heat can not be dissipated, which will affect the cooling effect and affect the service life of the refrigeration equipment.
(2) If the refrigeration equipment is installed outside the basement, it will inevitably pull the distance between the remote unit and the internal unit, and increase the length of use of the copper tube. The closer the external unit and the internal machine are, the better the cooling effect will be. The cooling effect also reduces the life of the equipment.
(3) The construction of the basement construction cold storage equipment should be no more than 10 meters away from the external machine and the internal machine. Therefore, we recommend the good practice of the refrigerator: the external unit of the refrigeration equipment is installed outside, if the internal link is not more than 10 meters Far, then there is no problem. If you choose more than 10 meters to choose the distance between the basement and the ground tunnel, the outside machine must build a canopy to prevent rain and snow from entering the reservoir.
Henan Anbang Medical Supplies Co., Ltd. , https://www.anbangmedical.com