Electric blast drying oven maintenance specific method
- Clicks: 1325 Release time: 2014/12/5
Maintenance of blast drying oven 1. Do not over-extrude the contents of the blast drying box. The natural convection space of the air must be allowed to make the humid air accelerate on the wind top.
2. Before using the blast drying oven, you must pay attention to whether the power supply voltage used is consistent. When using, the power outlet ground wire must be grounded as specified.
3. Do not put flammable materials in the blast drying oven without explosion-proof device.
4. When using the blast drying oven, do not touch the electrical parts of the space on the left side of the box with your hands or use a damp cloth to wipe it with water. The power should be cut off during maintenance.
5, blast drying oven power cord can not be wrapped around metal objects, can not be placed in high temperature or humid places, to prevent rubber aging and leakage.
6. The blast drying oven should regularly check whether the silver contact of the temperature regulator is hairy or uneven. If it is, use the fine gauze to level the contact, then use it, and always wipe it with a cleaning cloth to make it in good contact. (Note that the power must be turned off). Do not hit the metal pipe of the indoor temperature regulator to avoid affecting the sensitivity.
7. After each use, the power supply must be cut off, and the inside and outside of the box should be kept clean. Hang the corresponding logo after cleaning.
Endoscope Storage Cabinet,Endoscope Cabinet In Hospital,Cabinet For Endoscope,Innerspace Endoscope Storage Cabinets
Taizhou Gaogang District Dixin Medical Equipment Co., Ltd. , https://www.dixinmedical.com