1. Pay attention to the location
The high-yield garden has stricter requirements for site conditions than the real garden. The leeward and sunny area should be selected in the walnut growing area, and the terrain should be flat and deep and fertile in the middle and lower parts of the river, hills or gentle slopes. The soil is well-permeable loam or sandy loam, with a pH of 7.0-8.0, and a groundwater level of no more than 2 meters. The best irrigation conditions are available. In order to facilitate management and give full play to economic benefits, the high-yield orchard should be There is a certain scale, generally the area of ​​each garden is not less than 10 mu.
2. Pay attention to planting methods
After the site was selected, the hole was dug and prepared in autumn and winter, and the size of the hole was 1 meter square. If gravel appears, it should be increased appropriately, and 5 kg of straw or 10-20 kg of green manure should be pressed into each hole, and the mellow soil should be backfilled to be level with the ground to increase soil organic matter and improve soil physical and chemical properties. When building a garden on gentle slopes (below 10 degrees), dig holes along the contour line first, and then build terraces; when the terraces are first repaired and then the ground is prepared, the thickness of the soil layer should be more than 1 meter.
Three, pay attention to choosing good varieties and strong seedlings
Good varieties and strong seedlings are the basis for high yield. The varieties used must be early-fruiting varieties that have been identified at or above the provincial level and have performed well in local introduction trials and are suitable for promotion. At present, the main varieties suitable for selection are: Zhonglin No. 5, Liaohe No. 1, Liaohe No. 4, Liaohe No. 3, Xiangling, Wen 185, Shanhe No. 1, Xifu No. 1 and so on. According to the characteristics of each variety and local site conditions, all regions should screen out 3 to 5 most suitable varieties for key promotion. There should not be too many varieties in each garden, and 1 or 2 main planted varieties are appropriate. At the same time, 1 or 2 pollen-matched varieties should be selected as pollination trees, which are arranged in bands or crosses according to the ratio of 5:1.
The high-quality grafted seedlings are planted as annual seedlings with a higher survival rate. The standard for strong seedlings is that the height of seedlings is more than 60 cm, the base diameter is more than 1.2 cm, the main root length is more than 20 cm, and the lateral roots are more than 15. The joints are required to be well healed, substantial, robust, and free from pests and diseases. For long-distance transportation of seedlings, they must undergo strict pest quarantine and insulation packaging.
Planting in late autumn or early spring is better, so that the root system is stretched, the seedlings are straightened, and the soil is compacted. After planting, fill the root water immediately.
4. Pay attention to reasonable close planting and proper intercropping
Early-fruiting and high-yielding seed gardens generally plant 30 to 40 plants per mu, namely 4 meters × 4 meters or 4 meters × 5 meters. If the garden is built on a gentle slope, it should be planted 1 meter inward from the edge of the terrace weir (deep soil layer), with a spacing of 4 to 5 meters, a row spacing of 6 to 8 meters, and 20 to 30 plants per mu. The good variety garden can be intercropped with beans, potatoes, vegetables, and shallow-rooted Chinese medicinal materials within 4 years; 5-7 years can be intercropped with fungi, Chinese medicinal materials, strawberries or green manure. Intercropping is generally not suitable after 8 years. No matter what kind of intercropping crop, it should be more than 1.5 meters away from the trunk.
Disclaimer: Some articles on this website are transferred from the Internet. If the legal rights of a third party are involved, please inform this website for processing. phone
Emulsions are one of the most commonly used formulations in cosmetics, ranging from thin fluids to thick creams. Therefore, the selection of emulsifier for emulsion cosmetics is of great significance to the research, production, preservation and use of cosmetics.
The function of emulsifier in skin care products is really too important. Without emulsifier, most formulas cannot exist, and many active ingredients cannot be added to the formula.
In skin care products, emulsifier has two main functions: emulsifying and dispersing oil and active ingredients in the formula, providing special skin sensation and rheological characteristics.
Luxury skin care products usually take Xanthan Gum, AGAR powder, gelatin, carrageenan or glycerin monostearate as the Emulsifying Agent.
Our company provides high quality and purity natural Emulsifying agents, which includes Xanthan Gum, AGAR powder, gelatin, carrageenan and glycerin monostearate etc. A custom formula is also available if you would like to have your unique solution.
Emulsifying Agent,Oil-In-Water Emulsifier,Food Emulsifying Agent,Emulsifier Oil Additive Agent
Allied Extracts Solutions , https://www.alliedadditives.com