Insulation rubber composite panel manufacturers quality suppliers

The rubber-plastic aluminum foil insulation tube adopts the aluminum foil composite technology to improve its moisture-proof performance, delay the aging rate of the material, completely avoid the defects of the surface crack of the rubber-plastic material, and greatly improve the service life of the material. Moreover, the non-combustible aluminum foil attached to the outside further improves the fireproof performance of the thermal insulation layer. Rubber and plastic insulation board has excellent fire performance. In accordance with the national standard GB/T17794-1999 "combustion performance classification method of building materials", rubber and plastic insulation board has been tested and judged as GB/17794-1999 B1 grade flame retardant material. The operating temperature range is from -50 ° C to 110 ° C. Rubber and plastic insulation materials are safe to use and will not irritate the skin or harm health. They prevent mold growth, acid and alkali resistance, and superior performance. Applications · Central air conditioning system refrigeration units and equipment · chilled water pipes · condensate pipes · ducts and hot water pipes

Specification model table: rubber sheet (1 meter wide)

Thickness 10mm 13mm 15mm 18mm 20mm 23mm 25mm 28mm 30mm

Meter / piece 20m 20m 20m 10m 10m 10m 10m 10m 10m

The thickness of the plate is 13mm, 18mm, 23mm, 28mm. The quantity can be customized and can be produced. Other specifications are welcome.

Packing

Rubber and plastic insulation board adopts transparent packaging and intuitive products. It is easy to accept OEM packaging for different brands in the world. Rubber and plastic sponge insulation material is a soft high-grade insulation energy-saving material which is made of rubber and PVC with excellent performance and is equipped with various high-quality auxiliary materials and foamed by special process. It is absolutely free of chlorofluorocarbons. This product has soft, resistant to bending, cold, heat, flame retardant, waterproof, low thermal conductivity, shock absorption, sound absorption and other excellent properties. Can be widely used in central air conditioning, construction, chemical, pharmaceutical, textile and other industries. Pipe standard length: 2 meters Note: 1, the above specifications are common specifications, if special specifications can be made according to user requirements. 2. The plate and pipe are black. If special color is required, it can be made according to user requirements. 3. It is recommended to use the plate for the outer diameter of the pipe exceeding 89mm. 4, the insulation material needs to be more than 25mm thick, using multiple layers of overlapping packaging, until the required thickness.

Eight advantages of rubber and plastic:

1. Green and environmental protection: It does not contain harmful chlorofluoride in the atmosphere and meets the requirements of ISO14000 international environmental protection certification. Therefore, it will not produce any harmful pollutants in human body during installation and application. 2, low thermal conductivity: rubber and plastic is a high-quality insulation energy-saving materials, is a cold, heat-insulating anti-condensation nemesis, low heat transfer coefficient and maintain stability, to isolate any heat medium. 3, good fire performance: rubber and plastic materials in line with the standard GB8624 "Building Materials Combustion Performance Analysis Method" has been tested to determine GB8624B1 class of flame retardant materials. 4, closed bubble structure: rubber and plastic is a closed bubble structure, the water in the outside air is difficult to penetrate into the material, has excellent resistance to water vapor permeability, the surface of the cold insulation layer does not have to add a vapor barrier. The rain resistance factor μ value of Hongyu Rubber is greater than 3500 (ISO9346) to form a built-in waterproof vapor layer, even if the product scratches does not affect the overall vapor barrier. Rainbow rain rubber is the insulation layer and the moisture barrier layer. 5, thin material, space: rubber and plastic use thickness is reduced by about two-thirds compared with other insulation materials. Therefore, the space above the ceiling of the floor can be saved, and the indoor height can be improved. 6, long service life: rubber and plastic has excellent weather resistance, anti-aging, anti-cold, anti-inflammatory heat, anti-dry, anti-humidity, also has anti-UV, ozone resistance, twenty-five years without aging, no deformation, maintenance-free Characteristics such as service life. 7, the appearance of high-grade, uniform and beautiful: rubber and plastic has a high elasticity, smooth surface layer, soft texture, even in the elbow, tee, valves and other irregular components rubber insulation board as one of the current excellent insulation materials, heat conduction The coefficient is small, the heat preservation performance is good, space is saved, material is saved, and it is widely used in air conditioning, heating and other pipeline equipment. At present, the material is very popular in the market, and the development prospect of large-scale enterprises producing rubber and plastic sponge is very good. Rubber and plastic insulation boards are widely used in many aspects such as sealing, shock absorption, heat insulation, sound insulation, printing and dyeing, and ion exchange. They are widely used in automobiles, instruments, meters, home appliances and packaging industries. Its shape is plate, strip, tube, roller, washer, etc., with various specifications and different shapes. Rubber and plastic sponges have many advantages in the production process. It is made of rubber and plastic with other materials and foamed. As a heat preservation material, it can be widely used in the fields of water heaters, air conditioners, and heating. The important thing is that its thermal conductivity is low, it is not easy to lose, and it is environmentally friendly and low-carbon, which is very suitable for the needs of the modern social market. In addition, its plasticity is particularly strong, and it can be processed into rubber and plastic sponge tubes according to actual needs, saving space, reducing costs and not wasting.