Solid pesticides Solid pesticides are generally afraid of water and moisture. Focus should be paid attention to moisture dampness, storage when it is to use wood, cement board or dried chaff, wheat straw, straw and other bedding, and pay attention to ventilation and tide.
The aerosol should not be stored together with volatile, flammable or explosive materials. Do not approach the fire source and the temperature should not exceed 30°C. Most liquid pesticide liquid pesticides are afraid of heat, fear of sun, and high temperature. Therefore, the key to storing liquid pesticides is to pay attention to heat insulation and sun protection, to avoid high temperatures, to prevent contact with the air, to stay away from fire, to prevent contact with oxidants and alkaline substances, generally should be placed in a cool, dry place, avoiding the sun, dry, generally pay attention to when storing Do not stand upside down on the top of the bottle. Do not store it with strong oxidants such as nitrates and strong acids and organics such as charcoal and paper scraps. Bottle caps and stoppers for bottled pesticides must be tightly capped to prevent decomposition. In addition, some pesticides should pay special attention to different treatment, such as phoxim and trifluralin have the characteristics of easy decomposition when exposed to light. Therefore, it should be stored in a dark and cool place. Dichlorvos are easily decomposed and should be sealed and not stored for a long time. Organophosphorus pesticides are mostly susceptible to alkali decomposition and failure, and should not be mixed with alkaline substances when stored. Bottled liquid pesticides can easily freeze at temperatures below zero degrees Celsius to form lumps or freeze-dried bottles. It is best to use rice husks for heat preservation and antifreeze during storage.
Gas Pesticides Gas Pesticides, also known as compressed gas pesticides, such as methyl bromide, are generally packaged in sealed steel cylinders or special tanks. Such pesticides are afraid of high temperature and high pressure, and they are afraid of shock and vibration. The emphasis is to prevent leakage and prevent explosions. Like methyl bromide itself is not easy to burn and explode, but it will cause explosion when it encounters high temperature or strong vibration under external force, and methyl bromide is also a highly toxic gas. During storage, it is necessary to check whether the valve is loose, whether the cylinder (can) is damaged, and there is rotation. No upside down, there is no spillage of pesticides, so as to strictly avoid safety risks.
Pain Relief Patch For Neck Shoulder,Lower Back And Leg
Pain Relief Patch for neck shoulder, lower back and leg.
[Name] Medical Cold Patch
[Package Dimension] 10cm×12cm 2pieces/box
The pain relief patch is composed of three layers, namely, backing lining, middle gel and protective film. It is free from pharmacological, immunological or metabolic ingredients.
[Scope of Application] For cold physiotherapy, closed soft tissue only.
[Indications]
The patches give fast acting pain relief for strains, sprains, cramp, bruises, swollen areas or joint stiffness.
[How To Use a Patch]
Tear off the packaging bag and remove the patch. Remove the protective film and apply the patch on the skin. One piece, one time. The curing effect of each piece can last for 8-12 hours.
[Attention]
Do not apply the patch on the problematic skin, such as wounds, eczema, dermatitis,or in the eyes. People allergic to herbs and the pregnant are advised not to use the medication. If swelling or irritation occurs, please stop using and if any of these effects persist or worsen.notify your doctor or pharmacist promptly. Children using the patch must be supervised by adults.
[Storage Conditions]
Store below 30c in a dry place away from heat and direct sunlight.
Pain Relief Patch,Pain Relief Pad,Pain Relief Plaster,Neck Pain Relief Patch,Back Pain Relief Pacth
Shandong XiJieYiTong International Trade Co.,Ltd. , https://www.xjplaster.com