1. Do not start to lift the clutch. Slowly release the clutch pedal while properly increasing the throttle. Otherwise it will cause the impact of the clutch assembly and transmission parts, and even damage.
2, Vice clutch maintenance. The secondary clutch cannot be pulled up (separated) for a long time, otherwise it will cause early clutch damage and should be noticed.
3, it is strictly prohibited to hang open. Tractors must not be engaged in neutral or stepping down the clutch pedal to go downhill.
4, the steering of the tractor. When the tractor is turning to reduce the throttle or shift to the low gear, a sharp turn must not be made using a single-sided action.
5, shift and speed selection. The shifting and operating speed selection of the tractor will cause the steering wheel to steer the steering wheel when the tractor speed is reduced. The tractor runs at high speeds and the correct choice of tractor operating speed not only achieves the best productivity and economy, but also extends the life of the tractor.
6, the use of tractor differential lock. Differential locks generally remain disengaged while the tractor is working. When the tractor's rear wheel unilaterally slips heavily or falls into a pit, it should depress the differential lock control pedal and keep it in this position, so that the differential lock is combined to drive the tractor out of the slippery area. When the differential lock is engaged, the tractor cannot turn and it will cause abnormal wear of the tire, damage to the central drive, and even rollover.
7, the brake of the tractor. Under normal circumstances, you should first reduce the engine throttle, then depress the main clutch pedal, and then gradually depress the driving brake operating pedal, so that the tractor stopped. In case of emergency braking, the main clutch pedal and the service brake operating pedal should be depressed at the same time. During driving, the driver is not allowed to place his or her foot on the brake or clutch pedal.
8, front-wheel drive operation. When the tractor is working in heavy field in the field or working on moist and soft soil, the front drive axle is normally engaged. When the tractor is used for general transportation on hard roads, the front drive axle is not allowed to be engaged, otherwise it will cause the early front wheels to work. Wear.
9, hydraulic output valve and its operation to achieve four-wheel drive operations. The tractor is equipped with a single-acting or double-acting hydraulic output valve, and the hydraulic output valve operating handle is operated to control the single-acting or double-acting cylinder on the implement. The hydraulic output valve of the pulling machine is adjusted to have a double action before leaving the factory. If a single-acting agricultural implement is required, the user can adjust it to a single-acting hydraulic output.
10, tractor oil requirements: 1 according to different environments, seasons choose different brands of diesel. It is forbidden to mix different grades of diesel fuel. 2 The fuel oil and transmission hydraulic oil added to the fuel tank must be filtered or precipitated for at least 48 hours before they can be used. 3 Do not refuel the fuel tank while the engine is running. If the tractor is working in hot or sunshine, the tank cannot be filled with oil. Otherwise, the fuel will overflow due to swelling, and if it spills, wipe it dry immediately.
Beard Straight Comb,Straight Beard Comb,Men Hair Straightening Comb,Electric Straight Hair Beard Comb
Shenzhen Jie Zhong Lian Investment Co., Ltd. , https://www.szmeizonscares.com