The secret of the labeling machine manufacturer makes the "warping mark" no longer appear

In recent years, people have been increasingly picking up product labels. Therefore, the labeling machine will also encounter various challenges in the development of the market, such as the technical challenges of label-bonding technology and the challenges of raw materials. It is a common situation in our use of the warp mark, which is mainly caused by the increase in temperature.

In addition to this, it may be due to the following:

1. The viscosity on the label is weak, which causes the label to not adhere well to the product when labeling.

2. The insufficient pressure of the cover wheel causes the label to not completely adhere to the surface of the product.

3, the choice of label material is not suitable for product type labeling. The selection label should be selected according to different types, materials, etc. Softer products should use some types of labels that are relatively softer than PE. PVC, PVC, undrawn PP or PE, PP synthetic materials, etc. For harder products, the label materials can be PET, PS, BOPP, etc.

4. The choice of adhesive used in label making is not suitable. For some products with large surface curvature, the adhesive should be selected with a higher initial viscosity when selecting the adhesive. At the same time, it is not advisable to use thicker or harder materials for label paper. Thinner materials such as film, thin soft paper and so on should be used. For products that need to pass through a process that may heat up the process, the preferred label material is a film type and a good initial adhesion. We can get from

It can be seen from the above four points that the meaning of the labeling machine cannot be replaced by other packaging equipment. As a labeling machine manufacturer, it is necessary to work hard on the efficiency and labeling effect of the labeling machine, and continue to use modern science. Armed with knowledge, the company uses new technology to innovate its own labeling machine to improve the efficiency and performance of the labeling machine, so that the labeling machine can better meet the needs of market development. In this way, our labeling machine manufacturers can fundamentally solve the development problem, in order to compete in the fierce market to win.