Operating specifications of the vibration platform

General use of vibration:

1. Check whether the support during transportation is removed before starting the machine;

2. Check if the vibration motor is damaged during transportation;

3. After unloading the vehicle, first connect the power supply for 2 hours, then arrange it to the designated working area;

4. After running for a period of time, remember to refuel the motor;

5. The vibration platform double-checks the bolt tightness of the vibration motor and the bolt is prohibited;

6, long-term operation. Check the vibrating body for cracks;

7. The table top and the bracket are bolted, which effectively avoids the breakage of the vibration platform under long-term working conditions.

Safety procedures for vibration platforms:

1. The vibrating table needs to be tested before use. First drive for 3 to 5 minutes, and then tighten all the fastening parts and repeat it 2 to 3 times before it can be put into operation.

2. In the production and use of the vibrating table, the test piece of the concrete test piece must be firmly fastened on the workbench. The placement of the test piece must be symmetrical with the center line of the table top to balance the load.

3. The vibration motor should have a good and reliable ground wire.

4. If the vibration table is abnormal during the production process, stop using it immediately. Unplug the power supply and check whether the fastening parts are loose. If necessary, check if the eccentric block in the vibration motor is loose or the parts are damaged. Tighten the loose parts and replace them. Damaged parts.

5. After use, turn off the power and clean the vibrating table.