Rotary tablet presses have great advantages for expanding production

The rotary tablet press is a brand-new Chinese medicine tableting machine. The contact parts of the body materials are all made of stainless steel. The scope of application is wide, and it is widely used in pharmaceutical, food, chemical, light industry and other industries. It can be seen in many places. It is only necessary to put the Chinese medicine that has been ground into powder into the machine, so that it can be made into a single pill like western medicine. It is very simple to operate. This also changes the traditional Chinese medicine, patients do not need to spend a lot of time to process as before, and then take those bitter Chinese medicine, take it.

The rotary tablet press is used to press various granular materials into wafers and shaped sheets, which is a basic equipment suitable for mass production. The structure is double-pressed, with two sets of feeding devices and two sets of wheels. 33 dies can be installed on the turntable, and 66 pieces can be pressed after one rotation. The speed of the turntable, the filling depth of the material, and the thickness of the tablet can be adjusted during tableting. The mechanical buffer on the machine can avoid damage to the machine caused by overload. There is a suction box inside the machine. The nozzle can absorb the dust generated when the machine is rotated, avoiding the adhesive blockage, and recycling the raw materials for reuse.

The rotary tablet press is based on the basic principle of a single punching machine. At the same time, it is aimed at the short-term failure to discharge air. The instantaneous pressure is continuous and gradually increases and decreases the pressure, thus ensuring the quality of the tablet. The rotary tablet press has great advantages for expanding production. Since multiple sets of dies are arranged on the turntable, the shaft rotates continuously. The granules are fed from the hopper through the feed to the mold ring located below it and placed in a rotating platform. The method adopts a filling method of filling the rails, so that the difference in sheet weight is small. When the upper punch and the lower punch are rotated between the two pressure rollers, the particles are pressed into pieces.