Multi-Wo test (doaho ®) on repair and maintenance of electronic equipment or machinery and equipment article can be said to be numerous, but it is really only a handful. The user does not take responsibility for the problem, but the responsibility is pushed to the quality of the vertical constant temperature and humidity chamber. However, as long as the operator is not the maintenance work of the test box, the equipment is regularly maintained with the correct maintenance method. Vertical constant temperature and humidity Test chambers rarely fail during long-term use. However, most operators should first understand the way the test box is properly cleaned and maintained before maintenance.
First of all, the problem of the placement environment of the vertical constant temperature and humidity chamber is also stipulated. It is recommended to place it in a relatively benign temperature environment. The recommended temperature value is 8 °C~23 °C. If it does not meet the temperature condition, it is required. Equipped with its appropriate air conditioner or cooling tower. There are three points that must be strictly carried out for the cleaning and maintenance of the inside and outside of the vertical constant temperature and humidity box:
1. The power distribution room should be cleaned at least once a year, and the dust in the room should be cleaned up with a vacuum cleaner during the cleaning process.
2. The outside of the vertical constant temperature and humidity chamber should also be cleaned more than once, and the soaping water should be wiped first during the cleaning process.
3. The vertical constant temperature and humidity chamber should be cleaned of its internal impurities before use.
The components of each system in the vertical constant temperature and humidity chamber are regularly maintained every month; the wet ball test cloth inside the cabinet should be replaced when the surface of the test cloth is not clean or hard.
Every part of the vertical constant temperature and humidity chamber needs regular maintenance, and all requirements are very strict. Please operate the operators in accordance with the standards.
Industrial 100Hz LiDAR Solutions
Industrial Laser Distance Sensor of the IT02S & IT03M series are designed for measurements of moving targets. The LiDAR distance sensor is a ToF (Time of Flight) LiDAR sensor capable of measuring the distance to an object as close as 3 centimeters and as far as 15 meters! The LiDAR laser sensor is widely used in many innovative applications on the market, including smart dustbin, unmanned supermarket etc.long distance control system.
Application areas of the sensor are:
> Harsh environments, like outdoors in strong sunlight
> Black surface can be up to 8m
> UAV/Drone Systems
> Intelligent Parking
> Smart Measure Systems
> Intelligent toilet
Industrial Lidar Sensor,Tof Laser Measurement Module,Tof Sensors,Time Of Flight Distance Sensor
Chengdu JRT Meter Technology Co., Ltd , https://www.rangingsensor.com