I. Plant growth hormone
Spraying or immersing the solution before the formation of mushroom buds, spraying 25 μl/l citric acid, 10 μl/l triacontanol, 20 μl/l gibberellin solution, 20 μl Indole acetic acid, 2010-6 naphthalene acetic acid, etc., have the role of promoting differentiation of fruiting bodies of mushrooms, and early mushrooming.
Second, injection of nutrient solution
It is suitable for the cultivation of common mushrooms and mushrooms in the late period of cultivation or for the first time. The autumn and winter mushrooms and mushrooms are used with caution. Selection of Japanese-made "Mushroom", "Mushroom Sensitive", domestic "promotion", "Fugu Peptide," "Mushroom nutrient additives," and other prolactin liquid agent. First, according to the product specification to prepare nutrient solution, use a syringe type water injector to inject mushrooms, according to the method of water injection, management, in the spring to more ventilation, using dry and bacterium management. The first tidal mushroom did not produce a good mushroom. The first step was to vent the hole or cut off a piece of sclerotin which was 3 cm square, to promote the evaporation of water from the mushrooms. The weight of each mushroom was controlled at 1.2-1.3 kg, and then 0.4-0.5 kg was injected. The prolactin solution was used for budding. Moisturizing and keeping warm in winter.
Three, water injection
Suitable for mushrooms with low water content and mushroom picking. The temperature of water used for water injection must be 5°C lower than the temperature of mushroom wood. In winter when the temperature is low, the thick water of the mushrooms should be caught on the first day of the arrival of the warm current. The mushrooms should be stacked and covered with a film, and the sun should be filled with water for several hours until the temperature reaches 20°C-25°C. The amount of water injection should be 80%-85% of the weight of the original bacteria bar.
Four, beat the beat
Some varieties have the characteristics of mushroom buds that are prone to vibration stimulation, such as the 939 strain, which can be used to stimulate buds. If the 939 strain is still not mushrooming at the beginning of the mushrooming period, it can be picked up in one hand. The shooter can use the puncture device to shoot the mushroom wood in a shocked wood way, or the two bags of mushroom wood can be picked up and touched, and the relative humidity of the air can be maintained. 80%-85%, the temperature is controlled at 8°C-21°C. When the temperature exceeds 20°C, it is suitable for ventilation, so management for 4-8 days can produce mushroom buds.
Although there are a variety of methods for propelling buds, different types of mushroom species and mushroom species in different situations should select the appropriate budding method, otherwise the effect would be counter-productive.
Membrane thickening, processing is quite difficult, in addition to the above-mentioned special methods to promote the formation of mushroom buds, the future should pay attention to do preventive work, such as timely bagging, selected season, formulated according to the requirements of the preparation, after the recovery of mycelial surface mycelium Ventilation and ventilation are used to promote its lodging, so as to reduce the phenomenon that the pellicles are thick and hard and difficult to produce.
Milk Replacer,Non Milk Creamer,Coffee Rich Creamer,Non Refrigerated Creamer
KARAK , https://www.jskarak.com